WCDMA-GSM Interoperability Tuning
- Introduction to GSM Idle Mode Behavior
- Signal strength measurements
- Initial cell selection: C1 criterion
- PLMN selection
- Cell reselection: C2 criterion
- Tuning the GSM idle mode behavior
- GPRS Idle Mode Behavior
- GPRS implementation on GSM network
- GPRS logical channels
- Initial cell selection
- Initial cell reselection: C31 and C32 criteria
- Tuning the GPRS idle mode behavior
- GSM/GPR -> WCDMA Cell Reselection
- Different planning strategies
- WCDMA initiation of neighbor measurements
- GSM/GPRS -> WCDMA cell reselection
- Tuning the reselection process
- WCDMA Idle Mode Behavior
- WCDMA logical, transport, and physical channels
- Signal strength measurements (RSCP-CPICH)
- Initial cell selection
- PLMN selection
- Cell reselection principle
- WCDMA -> GSM/GPRS Cell Reselection
- Different planning strategies
- GSM/GPRS initiation of neighbor measurements
- WCDMA -> GSM/GPRS cell reselection
- Tuning the reselection process
- GSM -> WCDMA Handover Execution
- GSM measurements on busy mode: The SACCH period
- Handover algorithm
- Basic candidate List
- Radio network features reordering the basic candidate list
- Initiation of WCDMA neighbor measurements
- Criteria for handover execution
- Constructing the inter-technology basic candidate list
- Tuning the handover evaluation
- WCDMA -> GSM Handover Execution
- WCDMA measurements on busy mode: The frame structure
- Handover algorithm on RNC
- Handover events description
- Triggering of handover events
- Criteria for handover execution
- Tuning the handover evaluation
- GPRS -> WCDMA Cell change
- GPRS measurements on busy mode
- Initiation of WCDMA neighbor measurements
- Criteria for cell change
- WCDMA -> GPRS cell change
- WCDMA measurements on PS busy mode
- Initiation of GPRS neighbor measurements
- Criteria for cell change
- Service based transmission rate change
- Course Recap and Discussion
